Board Tech
Featured on every Spline board
Triax and biax fiberglass are blended together in various methods to create the perfect ride.
C-10 Stringers - 10 full length carbon stringers are infused in our fiberglass for amazing pop
Spline Science shaping - We use math to make snowboarding better. The little differences in snowboards is what make them feel different from one to the next. With science shaping, math has helped create the perfect curves for each snowboard resulting in boards that turn hard, hold an edge and are easy to ride.
FAT (Figured area templates) - We've moved the floatation points and sidecut on the FAT series to give an entirely new and unique feel to riding powder. These boards are also short and wide and look, well, kind of fat.
SERS (Spline Energy Return System) - Every step you take while touring, is energy. Every turn you make is energy. The SERS returns that energy for easier touring and quicker turns. May be mistaken for camber and early rise tips.
Taper tips - Minimize overall weight and swing weight while still maintaining full strength.
Solid full length wood core - Along with our Taper Tips, our canadien full wood core are precision milled to ensure the perfect flex in every board.
Bio resins - Resin is a major component to a snowboard and is typically petroleum based. We've been using bio-resin epoxies since our first board and our testing has proven them to be super strong and it helps to help minimize our environmental footprint. Our epoxy emits less than 50% of greenhouse gases during production compared to petroleum based epoxies.
Sintered 4001 bases - Cause going fast is fun.
Race ready stone grinds - We work with a local tuning shop to get each board stone ground and fully race ready.
Impact plates - Kevlar stops bullets. So does sand, but sand doesn't help in a snowboard, except of course fiberglass is made from sand. Neither of which sound as cool as kevlar. Placed in the binding areas to decrease stress on the board and increase edge hold.
Urethane and UHMWPE sidewalls - solid and flexible sidewalls. We vary between the 2 depending on the board
Full wrap carbon steel edges - cause steel is stronger than plastic.
Splitboard Tech
Superlight construction - through the magic of engineering our splitboards are the same weight as our snowboards and just as strong. And typically the same weight as carbon boards from other companies..
Perfect Pivot - We've put many miles on a split and this makes a huge difference. The pivot on each splitboard is perfectly placed for optimum touring and switchbacking ease
Resin Tint - All our splitboards are colored via resin tint. A special colorant is added to the epoxy, layed out in a desired pattern and then the press takes over and creates a unique graphic pattern that is essentially your board's fingerprint.
Inside Steel edges - full length inside steel edges, cause sometimes you need to hold an edge while skinning or split skiing
Spark R&D hardware - Solid connection, quick transitions, no fuss and the ability to tighten the clips. We love them.
